Hot Search: 阿童木 机器人 D3P D3PM D4 D5 S6
go back
Electronic Industry

Sorting for battery electrode

After the production of battery pole piece, it is necessary to cooperate with the sorting camera to screen qualified products. Before the transformation, it is generally necessary to carry out the sorting work manually or with the help of non-standard mechanism. Because the battery pole piece is light and easy to be damaged, the efficiency of traditional separation is low. After replacing the robot, the efficiency of handling and sorting is greatly improved, and the speed can reach 90 pieces / min, which can replace 2-3 manual workers. 24-hour non-stop production, at the same time, the quality of pole piece can be effectively guaranteed in the process of handling.

Economic benefits

  • Production capacity

    90Pieces/min
  • Manpower

    2
  • Productivity improvement rate

    50%
  • Payback period

    18Months

Production-line process

  • 01

    The battery pole pieces produced by the front-end equipment are transported to the sorting camera through the belt line for automatic screening of qualified products.

  • 02

    And then take photos and locate through Astro vision system. The information obtained from the above two photos is automatically sent to the robot.

  • 03

    According to the received information (whether the products are qualified or not and the position angle information), the robot automatically sorts the qualified products to the qualified product station, and sorts the unqualified products to the unqualified product station to complete the sorting and stacking work.